SERVO SYSTEM gives very high cycling rates as there is no target to obstruct the core. An encoder measures the speed of the inside ply. This synchronises the cutting unit to the core speed. Because we are using several knives the tube is driven by SERVO DRIVEN support rollers. This is to ensure that each cut is complete without the various pieces “tailing” together. Each knife unit is individually SERVO OPERATED for fine adjustment via the touch screen keypad This is further aided because of the long cutting stroke available. The high speed of the machine is achieved by using a SERVO DRIVE motor All fixtures are included.
This inline system can be added to any existing winder.
| Technical Specification | |||||
|---|---|---|---|---|---|
| Diameter | Wall thickness | Min. Cut Length | Max. Length btw Knives | Max. Length Single Knife (any speed) | Cycles |
| 1"- 8" | 0.800" max | 6" | 71" | 130ft lineal tubing/min | 35 per min |
| 25-200mm | 20mm max | 150mm | 1800mm | 40m lineal tubing/min | 35 per min |